Baxi combi 105HE expansion vessel replaced | Central Heating Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Baxi combi 105HE expansion vessel replaced in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
W

Wjl52

Hi" folks I am new to this site and was wondering if anyone could help me with my boiler problem,s.
this is how it all started, my boiler was loosing pressure and had to be topped up every day, thought I solved the problem by repairing a split pipe,this seemed to cure fault for about a week then it started all over again loosing pressure, checked for leaks on system all ok,then I was told to check the pressure vessel when I did this I got water out off the valve so i presumed it was knackered and decided to fit a new external pressure vessel this seemed to work well for a while but found it hard to balance the water pressure in system if I topped it up to 1 bar it activated the PVR then had to top up again, fitted a new Pvr and pressure gauge now I top it up to 0.5 bar and when the boiler fires up it drops to 0 bar and gradually rises to2.3bar but i still need to top it up say once a week , now I have another problem discoloured water from the hot and cold taps water board has checked mains all ok an none of my neighbors have any problems with their water so I was wondering if it is possible to get CHW into the DHW.
Please can anyone help.
Regards WJL52
 
Very sorry mate , to work on your boiler I am sure you know you have to be gas safe registered , we cant help you because its against the rules, and if we do Croppie batters us
 
Status
Not open for further replies.

Similar plumbing topics

it is brand new ( 6 months old ) Worcester gas...
Replies
2
Views
737
losing pressure
L
just about to do that, WORCS bosch say fit...
Replies
3
Views
1K
  • Question
Thanks for the info. Went over today and it...
Replies
2
Views
747
A
As above 1 bar is more than enough vallants...
Replies
2
Views
671
    • Like
Of course, missed that off the first message...
Replies
2
Views
690
Back
Top