Baxi duo tec 24he mk1

[king of pipes]

Anyone know if these are available as a spare ? Can't find one anywhere merchants no use has 2 similar but not right . Cheers kop

 

[ShaunCorbs]

Your missing the other half normal stuck in the brass block best to replace the whole thing

 

[Harvest Fields]

GC number mate? Or are you on about the adjustables?

 

[hammers4spanner]

You can get a bahco spanner from poo fix

 

[king of pipes]

Hmmm not sure about that Shaun think it will end up as changing the whole thing . Kop

 

[ShaunCorbs]

Hmmm not sure about that Shaun think it will end up as changing the whole thing . Kop

View attachment 35113

View attachment 35114

View attachment 35115

Defo mate they snap for fun

New ones are brass

 

[Harvest Fields]

Cannot see it anywhere listed as a spare mate. Sorry

 

[king of pipes]

Guess this part is correct then Shaun any ideas on how to extract the broken one ? Cheers kop

 

[Harvest Fields]

Nice to know you can get them. Let us know if it works and how it goes.

 

[ShaunCorbs]

correct pair of point nose pliers and pull or replace the whole brass block

 

[king of pipes]

Sorted it chaps had to strip out the brass block and knock the broken bit back through the other way , fitted the new one all back together boiler kept overheating in hotwater mode grrrr drained again plate out was blocked not solid but enough to play up luckily I managed to clean it enough with a pressure washer so up and running again . Cheers kop

 

[Harvest Fields]

Good man. Will keep that part number for future.

 

[king of pipes]

Had another one today two in a week hmmm was under warranty but sorted it as i fitted in 2016 and was due a service i did get baxi to send me a replacement cartridge though. Kop

 

[Harvest Fields]

Had another one today two in a week hmmm was under warranty but sorted it as i fitted in 2016 and was due a service i did get baxi to send me a replacement cartridge though. Kop

View attachment 35221

View attachment 35222

Both fitted the same year? By you? What inhibitor do you use?

 

[ShaunCorbs]

Yep they go for fun

 

[king of pipes]

No mate didn't fit the 24kw that was 2006 , sentinel x100 stickers on the boiler , 28 erp I fitted adey pro 2 and adey chemicals 2016 this one was clean very little black on the magnet hardly any when I serviced it . Kop

 

[Harvest Fields]

No mate didn't fit the 24kw that was 2006 , sentinel x100 stickers on the boiler , 28 erp I fitted adey pro 2 and adey chemicals 2016 this one was clean very little black on the magnet hardly any when I serviced it . Kop

Just poor build quality?

 

[king of pipes]

This one was brass though Shaun heat creeping into heating when there was a demand for hot water it's on the drop down flap didn't look anything wrong with it but swapped it and that sorted it

 

[king of pipes]

Fitted dozens of em bud never really had it before on any of mine