Baxi Duo Tec GA | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Baxi Duo Tec GA in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

shaky

Plumbers Arms member
Plumber
Gas Engineer
Messages
259
Hi all,
Went out to one of these pile of junk today, and is there a common problem with the hot water. I know on the standard Duo Tec the hot water sensor light stays solid when detecting hot water flow,but on GA I went to it flickers and it seams like it's not sensing water flow because you run the hot tap the light flickers but nothing happens to the boiler not even attempting to fire. So I'm going back with a new sensor tomorrow.
 
Hi mate, what was the outcome on this one? I had a similar issue and turned out it was the board and rds stick.
 
Status
Not open for further replies.

Similar plumbing topics

Check the continuity of the flue with your...
Replies
3
Views
2K
Sorry for late reply,was printed circuit board
Replies
5
Views
233
True, but it happens a lot.
Replies
6
Views
3K
  • Locked
When your gas safe pm me and will re open it up
Replies
7
Views
2K
some one playing again??????
Replies
2
Views
2K
Back
Top