Baxi Duo tec

[bert large]

I have read several times that the Baxi Duo Tec Mk 1 is a direct replacement for the old 80 E & 105 E which I can understand as it uses the same jig & pipe centres.
What I am unsure about however is what happens with the flue. The old 80E/105E had a centre line flue whereas the Duo Tec's flue is offset to the right.
Is there a special adapter available to bring the flue back into the centre or does a 90 degree flue elbow do the trick ?

Cheers.

 

[tamz]

45º bend

 

[Billy Bob Bob]

45º bend

from memory i think this throws the flue up higher you can buy this though,Baxi & Potterton Offset Flue Adaptor Elbow [720635501] - £88.23 : Plumbers Merchants in London & Essex - Compass Plumbing & Heating

 

[Millsy 82]

from memory i think this throws the flue up higher you can buy this though,Baxi & Potterton Offset Flue Adaptor Elbow [720635501] - £88.23 : Plumbers Merchants in London & Essex - Compass Plumbing & Heating

That looks worse than putting a 45 on the flue.

 

[Billy Bob Bob]

the other option the op could do is use a main eco,same jig center flue

 

[bert large]

Thanks chaps. Just interested to know how to overcome the problem. I installed quite a few 80E & 105Es, most are still working but all are over ten years old now & a few are starting to look a bit ropey. It would be a shame to rip everything out if there is an easier retrofit option.