baxi duo-tec2 fault code e385

[spacekev]

as above driving me insane about ten people from 27/4 rescue looked at it can not find problem,i get hot and ch but it takes a while for it to come through all the time flashing 385 then all of a suden will fire up and be fine

 

[ShaunCorbs]

Low incoming voltage eg below 200v ac best have a word with a sparkie I would say

 

[Georgej10]

as above driving me insane about ten people from 27/4 rescue looked at it can not find problem,i get hot and ch but it takes a while for it to come through all the time flashing 385 then all of a suden will fire up and be fine

Hi, did you get this resolved? I’ve had the same issue occur. Was it a pcb fault or some other electrical issue?

thanks

 

[spacekev]

yes the pcb was the fault

 

[Georgej10]

yes the pcb was the fault

Ok thanks

 

[king of pipes]

Had this on one occasion and it was the PCB at fault get it replaced they are not that expensive fortunately. Kop