baxi fs 501 flue | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss baxi fs 501 flue in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
L

lurkeyo2000

hi this floor stander is coming out and its in a bloc k of flats 4 storey. shared flue. how do you seal flue up to stop poc.
 
Talk to gas safe technical help for their answer, not one I'd look at by choice.
 
Persume se duct or u duct
manufactorers still do flue kits for these systems so could fit new boiler to flue system if required
To block up old flue opening to these flue systems ,just brick up
But check with block management first,to advise them you are no longer using flue and blocking up,they may have a specification they require followed,indeed you may have to use existing flue system as they may not allow flues on outside walls,if pre fab block,you can not just go drilling through anyway as pre stressed and you could end up with big problem
 
Last edited by a moderator:
right he would have to check boilers suitable for se or u duct as well not all are
 
Se or u i presume, metal flue pipe i think, only wanted to seal pipe going into wall.i do not think am explaining this very well.....
 
Status
Not open for further replies.

Similar plumbing topics

It might be, if it can't be rectified by...
Replies
6
Views
547
Atag let you go for the 600mm clearance away...
Replies
9
Views
989
  • Question
Let them supply and fit , then it’s their...
Replies
3
Views
672
Yes these can be converted to any type of...
Replies
2
Views
596
P
Tricky situation for you. Boiler shouldn't...
Replies
2
Views
573
Back
Top