baxi question

[hammers4spanner]

Two questions what is the logic if any why on the platinums /duo tec that the flue is off centre and the daft angle on the prv?

 

[Billy Bob Bob]

prv can easily be straitened up,just turn it,flues off center to accommodate the EV

 

[Gasmk1]

Don't know but you can get an elbow that brings it back to centre.

 

[Rickster123]

And why has the condense connection been moved to the front?!

 

[Billy Bob Bob]

And why has the condense connection been moved to the front?!

??? not seen any on the front yet

 

[Rickster123]

Potterton pro max ultra. Same as the baxi. Last couple I've had have a new condense outlet at the front. Looks gash.

 

[hammers4spanner]

Fitted a platinum today condense pipe at the back

 

[Rickster123]

On the duotec GA

 

[Millsy 82]

Don't know but you can get an elbow that brings it back to centre.

Is there?????

 

[SmokeyJ]

Part no 248231 listed under 'wall jig' so would assume boiler should come with one?

 

[Billy Bob Bob]

Potterton pro max ultra. Same as the baxi. Last couple I've had have a new condense outlet at the front. Looks gash.

not done that one,i stick to duotec erp

 

[Unregistered]

I did the Duo Tec day course at Exeter college last May and was told Vaillant who also use the Giannoni heat exchanger bought the rights to centralise the flue and that's why other manufactures who use it have to offset via their flue hoods.

 

[Millsy 82]

Part no 248231 listed under 'wall jig' so would assume boiler should come with one?

I wish I knew that a couple of years ago!

 

[newcastle phill]

Ive fitted 2 this week. Both condensate at the rear. New erp models too...