baxi trial boiler

[smtplumbing]

not sure if some of you guys fitted one yet (not many in the uk) am sure if your fitting alot of baxis then the rep would of asked you to trial fit one, These are on testers just now so may go going on sale next year

We have just fitted a 35 combi just wondering if anyone else has

 

[Ermintrude]

Yep what a horrid heap of shish. Did you like the conny and expensive flue connections. I wouldn't have that flue in a ventilated feild.

Service and repair looks worse than a worst er botch.

Pcb and interface are crap too. Filling loops nice tho. Did ours in October

 

[gasmanrob]

cant say i have and i was chasing the rep for a freebie the other week for dear old mums place bless her.

Ill be pulling him up on this!!! i'll be taking double dust sheets and thermos cups next time i spy him!

 

[gasmanrob]

and ermintrude its worst er tosch

 

[arran197]

What is it a new model? I hope not, the GA Duo Tec is hopeless compared to the HEa.

 

[smtplumbing]

we had done two 1 with inhibitor and one without again the one with inhibitor had a filter and the one without inhibitor never had a filter

jig is weird the flue dont like does not clip in plastic bend etc ( were you allowed to cut yours) flow valve leaked on boiler install two rubber o ring was twisted the condy first time leaked everywhere( dont know if i pushed in correct took 4 times to get it right) 2nd one has a hole in the condy

The pcb with the Lan cable so you cant rewire the power supply ffs wiring up the boiler is a bit confusing lol

 

[smtplumbing]

only good thing is it if goes wrong baxi will pay us to fit a duo tech 40 kw lol

its small but powerfull but looks p...

 

[TBServices]

Did you not take any pictures? FAIL.

 

[Ermintrude]

It does chugg it out. Yeh the jig is a joke . Did you manage to fit bottom skirt ok? We did about 8 in all few went ok few had faults..... Error 54 I think which needs laptop diagnostics..... Only 3 or 4 Baxi lads have and are very slow.

Think cut flue conny was a beauty. U wired up stats yet ? It's a logic flue pipe. The elbow is that flimsy it's almost see through. We made trial jobs have co detectors because if elbow.

 

[TBServices]

This thread is pretty much crap.

You should be telling us about this boiler instead of tossing each other off!

 

[smtplumbing]

Tb services course i did haha just not got one with the cover on lol,

They told use not to cut the flue lolthe plastic thing at the botton hahah wast about the prv

 

[Ermintrude]

This thread is pretty much crap.

You should be telling us about this boiler instead of tossing each other off!

I did ages ago and I said it was cheap nasty rubbish. Tb supaplum said he would give u reach round

 

[TBServices]

Oh good. Was getting jealous then.

Get some pics up then. Baxi need a new product, the HE A is a frigging antique, too big, too heavy and too ugly.

Is this gonna be another GA / netatec fiasco?

 

[Ermintrude]

No new solo. It's not to be marketed as a combi.

 

[TBServices]

Ahhh, so it's a heat only?

 

[Ermintrude]

No the trial is a combi it's a Northern Europe remeha re model. But Baxi are to sell it as a system.

My original post was 17/19/12 Baxi have reached a new low. In the arms. Don't know how to link on tap talk.

 

[smtplumbing]

as abover its weird they are trailing this as a combi but its for a system i stick some pics up later

 

[gassafe]

as abover its weird they are trailing this as a combi but its for a system i stick some pics up later

Still waiting on them...

 

[Billy Bob Bob]

No new solo. It's not to be marketed as a combi.

there will be a new solo brand new hex already on test much more durable looking at it

 

[Ermintrude]

This one they are testing the gas valve! After GA fiasco. Must be making a mish mash. I shall enquire. I'm in Warrington training center on Friday.

 

[Billy Bob Bob]

This one they are testing the gas valve! After GA fiasco. Must be making a mish mash. I shall enquire. I'm in Warrington training center on Friday.

seen it at Preston