Best ratchet cutters for Marley waste pipe?

[Captainflood]

I have always just used a junior saw, but decided to get myself cutters for waste pipe , I know some are more suited to poly pipe, guy I work fae bought some that seemed to have trouble getting through Marley which I mainly use willing to spend up to about£40

 

[Dannypipe]

I have pipe slices for waste pipe. Use a wratchet for speedfit, mdpe, hep ect.

Dont know who makes the pipeslices but they work a treat. Cut though some Marley pushfit waste the other day. Had to squeeze the cutter a little as it has a slightly small OD.

Anyway went through a treat. Cost me £18 each. One in inch and a quarter, one in inch and half...job done and within your budget. Most plumbers merchants sell em.

 

[GQuigley67]

the slices are great and I'm hearing about this nylon string trick also should be handy

 

[AWheating]

rothenberger do a range of ratchet cutters in diffrent sizes that can be used for waste pipe which are really good. There is a trick to using them for best results. I run mine around the pipe slowly adding pressure then cut through. I also have the pipeslice type which are great.

Rothenberger Rocut 42TC Professional Plastic Pipe Cutter Shears - Transtools

 

[Bartdude]

I can sell you a lot of hacksaw blades for £40

 

[293847563]

rothenberger do a range of ratchet cutters in diffrent sizes that can be used for waste pipe which are really good. There is a trick to using them for best results. I run mine around the pipe slowly adding pressure then cut through. I also have the pipeslice type which are great.

Rothenberger Rocut 42TC Professional Plastic Pipe Cutter Shears - Transtools

I agree with this.
I use it to cut waste, polypipe etc, it will cut with ease any plastic pipe. I hardly get to use the hacksaw now. In fact i have just bought another cutter just in case i loose one.
Although i would suggest the rocut 50TC that way you can use it for any plastic pipe up to 50mm(2").

You won't know how good this is until you have tried it.