Best unvented cylinder

[DGT plumbing]

Opinions please unvented fitters, what do you think is the best unvented cylinder on the market. I am G3 registered before you ask.

 

[ShaunCorbs]

Gledhill my go too

 

[townfanjon]

I used to like the centerbrand / plumbs cylinders but they seem to have got too expensive.
Ultrasteel cylinders are Tribunes with grey lids , they take some beating.

 

[chris watkins]

Megaflo if not a tenanted property or in a loft.

 

[Sharp Point]

Gledhill my go too

2nd that

 

[AMGasServices]

I personally like vaillant unistore

 

[Last Plumber]

Vaillant.
Gledhill are OK and have good customer service. I do not like the coil. That's the only thing that puts me off a bit.

 

[DGT plumbing]

Thanks for the replies everyone, thought there may have been more opinions than that obviously not controversial enough.

 

[chris watkins]

Oh there are hundreds of them out there to choose from.
Pays your money, takes your choice.
Just don't go too cheap there are some very thin stainless units out there.

 

[SimonG]

Hate megaflo with a passion. Which is funny because I went on to fit many a centre brand one, made by heatrae.
Swapped onto Warmflow, but only did a couple. Didn't come with compression connectors so you needed a fitting for every connection,
Now using RM, quite happy with them.

 

[Jim Goodenough]

Megaflo if not a tenanted property or in a loft.

2nd that

Why not Chris & Bogrodder??

 

[Jim Goodenough]

If you need 28mm C & H connections the Dutypoint Element is worth considering.

 

[Gasmk1]

Vaillant.
Gledhill are OK and have good customer service. I do not like the coil. That's the only thing that puts me off a bit.

I thought gledhill make vaillants cylinders

 

[Gasmk1]

Why not Chris & Bogrodder??

because of the way you recharge the air gap customers can do it themselves if shown how tenants won't

 

[Gasmk1]

i like Oso cylinders as the smaller ones the pressure vessels are hidden by the lid you can remove them without any pipe cutting if there is a problem as all pipes can come up behind, also the drain off is at the bottom of the cylinder so nothing left in the cylinder.

 

[Last Plumber]

I thought gledhill make vaillants cylinders

First I've heard of it if they do.
The coil in Gledhill is a flexible one and I had an issue with noise from one. They sorted it no problem at all and the customer service was brilliant.

 

[Gasmk1]

i was told by someone who worked at gledhill that they were, the person worked at a pretty well known plumbing supplier before and went back after she worked at gledhill, so no reason not to believe them