Biasi Garda m90f 24s flue | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Biasi Garda m90f 24s flue in the Plumbing Jobs | The Job-board area at Plumbers Forums

Hi
It’s around 12 years old and it’s non condensing. The boiler has been capped because it looks like it’s got signs of spillage. The flue that is fitted is part number - 10999.0148.1 but it doesn’t look right. It looks like it’s for newer biasi boilers.
Thanks for your help
 
Who capped it ?
 
The guys capped it due to seeing daylight through the combustion chamber (he thinks it’s the wrong flue) is this correct? Is it normal to see daylight
Not normal to see daylight and cannot comment as if it is the wrong flue then at 12 years old you probably will not get the original. Unless it is the correct flue but fitted badly, in which case you can get the flue so fit a new one.
 

Similar plumbing topics

Boiler: Biasi Riva Plus He 28C Erp GC...
Replies
0
Views
150
Atag let you go for the 600mm clearance away...
Replies
9
Views
972
Good Morning Did you find the part you...
Replies
1
Views
2K
Don't know if you're sorted or not but I...
Replies
8
Views
542
It might be, if it can't be rectified by...
Replies
6
Views
543
Back
Top