Big thanks to GASMAN

[P J F PLUMBING]

Many thanks mark your a star that 80 Eco was a nightmare !! Went back another 3 times this week after. The rads were getting to 93 degrees !! To touch. Anyways new boiler going in Monday many thanks again Mark AKA GASMAN !!

 

[Koogatubac]

What did he do? Is it safe to ask? Or something behind closed doors ?

 

[galaxy_plumbing]

haha, hopefully nothing too naughty.

 

[Billy Bob Bob]

just give some advice though nothing was going to save that baxi it was sludged to death

 

[P J F PLUMBING]

Answering the phone a few times. Awesome guy !! Quick question baxi 80 Eco. Is the JIG the same as the new main Eco elite ?? As in in hook put new one one old jig job done ect ??

 

[Ermintrude]

Same as 105e me thinks so I can confirm that a duotec will fit on.

 

[P J F PLUMBING]

So it should be lessen nuts drop off boiler power flush the drop new boiler on same jig new washers and new flue and condense pipe job done

 

[Ermintrude]

Don't let our lads do that. Jig has to come off but you can use same screws. What happens if jig or valves fail. It's all on your toes! And for the 28 seconds it takes? Flue on duo needs 35mm nocking off rhs of hole.

 

[Ermintrude]

Blow off even bolts back on so.... Cut nothing not even power leads

 

[Billy Bob Bob]

Blow off even bolts back on so.... Cut nothing not even power leads

hes fitting a main eco,not duotec,mains flue is in center i would use the same jig but replace the isos

 

[Ermintrude]

Don't fit mains or remember their names same as Potters just refer to the parent Baxi

 

[P J F PLUMBING]

It's a baxi in disguise