Bleeding a radiator for the first time | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Bleeding a radiator for the first time in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
5
Hello I am trying to bleed this radiator. Can you please post which key I need to bleed? Or hat tool do I need ? Thank you.

IMG_2119.JPG


IMG_2120.JPG


IMG_2121.JPG


IMG_2122.JPG


IMG_2123.JPG
 
Top right and you need a bleed key
 
If you have a combi boiler or sealed system you may have to top the pressure back up , if you have ,
find out how to before you bleed the rad .
 
One of the bleed keys as shown further up the thread
 
Look at the simple bleed keys at the top of this thread. Plenty of space to fit one of them in. Quote for what? A bleed key?
 
The size of that air tap key I posted is only 1 1/2" wide.
If you can get a screw driver in the slot, use that.
You only need to crack it open though, don't be tempted to pull it all the way out.
 
Status
Not open for further replies.

Similar plumbing topics

Pin hole leak on suction side of pump.
Replies
1
Views
502
  • Question
Close rad valves, pull bleed screw out, add 2...
Replies
3
Views
687
  • Question
Ah ok. In the past on bleed valves I have not...
Replies
4
Views
868
  • Question
You can buy a replacement bleed screw, but...
Replies
1
Views
495
Hello, Snowhead. Thanks for your reply...
Replies
6
Views
1K
Back
Top