blockage in central heating sytem | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss blockage in central heating sytem in the Central Heating Forum area at Plumbers Forums

Messages
2
after 2 years and 7 plumber visits i'm now going to try and alleviate the problem myself!, according to said plumber visits i have a blockage between lower and upper radiators, downstairs perfect, apart from 1 needing bled ocassionally, upstairs rads have clear water but no heat, any clues to how to approach this? and would powerflushing help?
tyvm .
 
We need more info.

What system?
Are there any motorized valves?
Boiler type?
Is there any heat/warmth at all in the upstairs rads or are they stone cold.
Is the downstairs working perfectly?
Did this bleeding of the downstairs rad occur following the upstairs ceasing to perform, or have you always bled it?
How did the magnificent 7 diagnose this blockage? by guess work or is it a factual thing?
 
after 2 years and 7 plumber visits i'm now going to try and alleviate the problem myself!, according to said plumber visits i have a blockage between lower and upper radiators, downstairs perfect, apart from 1 needing bled ocassionally, upstairs rads have clear water but no heat, any clues to how to approach this? and would powerflushing help?
tyvm .
You do not say what type of system you have. However in most cases I would shoot the system up with mains pressure. If its a sealed system it will be at 1.5 bar. If its open vented (with a small roof tank) then it will be at atmospheric pressure and a blast of mains will help. Let us know which and are there any zoning arrangements to go wrong. centralheatking
 

Similar plumbing topics

Thanks, I shall take a look in that case and...
Replies
21
Views
3K
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
840
Hi Just looking for some suggestions on what...
Replies
0
Views
1K
They can stick quite easily, try a spray with...
Replies
4
Views
727
P
Mr Speaker: I'm tempted to draught a sarcastic...
Replies
22
Views
4K
Back
Top