Blocked oil feed pipe

[RUPERTC]

10 M of copper 8mm oil feed pipeline from tank with only a 1m head.
Oil not reaching boiler.
Replaced filters.
Is there a way to rod such a small pipe?

 

[Jay The Plumber]

get your suction pump on it or blast it out with a compressor (with other end tied into a rubble sack)

I assumed the fire valve etc is clear and not in the line

 

[rpm]

10 M of copper 8mm oil feed pipeline from tank with only a 1m head.
Oil not reaching boiler.
Replaced filters.
Is there a way to rod such a small pipe?

Think the boys use a compressor for this.
DO NOT PUT A FINGER OVER THE END OF THE PIPE WHILST DOING IT! !!!

 

[Chalked]

Have you dipped the tank to make sure there is plenty of fuel?

 

[Best]

Suction pump would clear any airlock.

 

[RUPERTC]

get your suction pump on it or blast it out with a compressor (with other end tied into a rubble sack)

I assumed the fire valve etc is clear and not in the line

Success with the compressor thank you all.