blow off capped off

[jonesy76]

Went to my mums bungalow to see about fitting an outside tap took alook outside and noticed a pipe below the flue which was obviously the blow off but what puzzled me was it had a soldered cap end on it its not full soldered but never seen this before fitted a lot of boilers with my ex boss but alwqys kicked them back to the wall

 

[Dotty]

22mm cap on 15mm pipe?

Some guys do this rather than turn the pipe back to the wall.

 

[SimonG]

There's a special fitting you can get that looks like a cap. But I just point it back.

 

[jonesy76]

cheers for the reply doesn't look like an ordinary cap end

 

[Howsie]

Here you go: 15mm Mushroom Vent Pipe Cowl for Boiler Blow Off - flowflex components pipe cowl B270.26 - Leagrave Heating Supplies

 

[Centralheatking]

What ? just solder a 22cap on to 15mm pipe at the top on the outside ! Ugh - but I can see
it works and might look quite neat - CHK

QUOTE=croppie;557239]22mm cap on 15mm pipe?

Some guys do this rather than turn the pipe back to the wall.[/QUOTE]

 

[Koogatubac]

Wont be capped off it will be a umbrella fitting/ mushroom fitting

 

[CXR100]

yes, cut the 15mm at a 45degree angle then solder the 22mm on the end, my previous employer sometimes did this!

 

[Howsie]

Here you go: 15mm Mushroom Vent Pipe Cowl for Boiler Blow Off - flowflex components pipe cowl B270.26 - Leagrave Heating Supplies

Cough!

 

[Howsie]

At last. Bloody tech.

 

[Killy Bing]

Great for watering your plants

 

[ashwilson]

Ideal supply these blow-off's with their logics/vogue's etc.

 

[Bunker]

Just dont use them on a D2 !!
(assuming they do other sizes)