Boiler clearances | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Boiler clearances in the Boilers area at Plumbers Forums

Status
Not open for further replies.

Atouchofgas

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,159
Cust has problems with national house builder, boiler is fitted in kitchen cupboard ( ideal logic heat 24 ) everything works ok, but boiler has been label ntcs as only 1mm between cupboard and boiler. Is this correct? Should be 2.5mm
 
what do mis say ;D

mis say 2.5mm

a bit of a stretch for a ncs :D

but i guess if you cant take the cover off easy to service it
 
It should be 2.5, cust has had numerous problems with the builder and is basically looking for problems
 
Status
Not open for further replies.

Similar plumbing topics

Thanks for both replies - so the search is on...
Replies
2
Views
588
I am only telling you what I have seen. I...
Replies
8
Views
1K
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
I’m guessing the installer didn’t have a...
Replies
3
Views
422
T
Please advise me. I am a disabled pensioner. I...
  • TheCatWhoNeedsaHotShower
  • Boilers
  • 0
  • 441
  • Latest:
  • TheCatWhoNeedsaHotShower
Replies
0
Views
441
TheCatWhoNeedsaHotShower
T
Back
Top