Boiler flue close to wall

[jase158]

need a boiler (heat only) that has flue going to side but has to go behind a soil pipe, so needs to be as close to wall as possible, any recommendations? next doors is going diagonally through wall and looks ugly so want to go as directly through wall as possible.

 

[albatross]

Would a 45 bend take the flue flat back to the wall? So flue turret is diagonal be then the 45 gives a straight run flush to the wall.

 

[Ermintrude]

My thoughts same as albatross. Or you could come infront of SVP?

 

[jase158]

cant go in front as would be too close to window. hmmm, didn't think of 45, will have to rearch the rules on that as already has 90 on it so can I have 45 as well

 

[albatross]

What rules? Most boiler flues can run several meters or have several bends. A 45, a 90 and a standard terminal is nowt.

 

[Nostrum]

cant go in front as would be too close to window. hmmm, didn't think of 45, will have to rearch the rules on that as already has 90 on it so can I have 45 as well

In front and plume kit?

 

[Reg Man]

90 off the top followed by 45 to take it behind the soil pipe. Might have to distance space the boiler off the wall to get it in though.

 

[AWheating]

or fit the boiler alittle lower and use 2x45's to get you the right distance.

 

[Ermintrude]

Or wop 45 in boiler and 90 into that?

 

[AWheating]

Or wop 45 in boiler and 90 into that?

WOP ?? your getting abit technical now.

 

[Ermintrude]

Boosh or wang!

 

[Deleted member 44451]

Boosh or wang!

i thought swearing was not allowed