Boiler location | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Boiler location in the Boilers area at Plumbers Forums

Status
Not open for further replies.
B

bikerbas

Hello
If fitting a combi boiler into a airing cuboard in the centre of the house ,how would you get the safety discharge valve to the outside wall is there a maximum length.
Could you run 15mm copper into the loft and then out onto the gable end?
 
no you cant go up with the discharge ,it must fall from the boiler . cant you run it under the floor to an external wall. if not some manufacturers do a remote discharge kit which can be piped into the return to the boiler .seen so many going up though .

regards ant
 
Cheers for that i was just after some advice so when im gas safe im going to install a new boiler in my own house and was just weighing everything up
 
Is it right you can run it into the condesate pipe with a tundish?
Im sure ive seen it discussed on here.
 
Status
Not open for further replies.

Similar plumbing topics

Yes stnd domestic meter The gas engineer can...
Replies
9
Views
923
Fair point. There is a dearth of heating...
Replies
9
Views
1K
10 o’clock / 45 degrees would be better than...
Replies
3
Views
627
Thanks for both replies - so the search is on...
Replies
2
Views
598
Replies
15
Views
2K
Back
Top