C
craigy
Hello
gloworm flexi com 38 kW cutting out and showing f25 (low return temp)
system is an s plan plus, 22 mm flow from boiler, pulled bends, first t off is underfloor heating which has gate valves on inlet and outlet, then the three 2 ports t off on one branch, the flow carries on to underfloor heating one floor above.
all rads get piping hot, as does under floor heating, the return flow temp I have checked as I have access to each circuits return leg. All seem to get to temp with 5 mins.
Any ideas?
gloworm flexi com 38 kW cutting out and showing f25 (low return temp)
system is an s plan plus, 22 mm flow from boiler, pulled bends, first t off is underfloor heating which has gate valves on inlet and outlet, then the three 2 ports t off on one branch, the flow carries on to underfloor heating one floor above.
all rads get piping hot, as does under floor heating, the return flow temp I have checked as I have access to each circuits return leg. All seem to get to temp with 5 mins.
Any ideas?