Boiler lost pressure

[Cristina]

I have a Glow-worm Flexicom, which indicated that there is a loss of pressure (0.3 bar), so not hot water and heating. The filling loop is not located under the boiler but in the kitchen near the water tank. I am not sure what I have to turn, the two brass nuts with the two knobs (B) or the little screws (A)?

 

[townfanjon]

A and A cristina, slowly , open one , and let the water in with the other , then close them both , good luck

 

[townfanjon]

Sorry set pressure at 1.0 bar. You also may have to reset the boiler after you have repressurised it.

 

[snowhead]

And when the valves are open , if you cant hear water rushing through and the pressure isn't increasing, try straightening out the hose it looks kinked.

 

[Cristina]

Thank you, I'll try in the morning so if there is a problem at least I can call someone!

 

[plumben]

Make sure the two nuts (B) are hand tight before you turn both isolation valves (A)

 

[Cristina]

Done and the boiler is now working perfectly.
Thank you

 

[Dotty]

Thank you for coming back to let us know how you got on.