I have a viessmann vitodens 050-W BPJD. Central heating working as it should however the hot water is getting to high, reaching 90 degrees cutting out to cool down and then starting again. Seems very noisy in hot water mode also. I’m going to clean the plate heat exchanger once the new washers have arrived but just wondering if any one would recommend looking at anything else?
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Boiler overheating in hot water mode. in the Boilers area at Plumbers Forums
- Messages
- 34,633
- Solutions
- 1
Test the plate first could be pump
Similar plumbing topics
According to Worcester Cloudy Water |...
That is manifold fo4 all rooms on 1st floor...
Thanks, have also contacted Viessmann. It's at...
At the moment when you move the hot water...
Omg, thank you :)
I have a filling loop with 2...