Boiler power cable on hot pipe and water pipe pressed on isolator switch | Boilers | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Boiler power cable on hot pipe and water pipe pressed on isolator switch in the Boilers area at Plumbers Forums

Messages
2
CE59A400-5273-4C98-ACCE-6DF023018DDD.jpeg

hi, I’m wondering, is this cable safe to be going around the very hot copper pipe as it is and is the white pipe okay pressed against the isolator switch? Gas engineer came to do it today. Just seems a bit risky to me so wanted to check I’m not going die if something leaks or gets too hot.
 
Not the best I would get a piece of 22mm pipe insulation
 

Similar plumbing topics

D
As above The Grant instructions tell you to...
Replies
3
Views
970
There could still be 22mm pipework left...
Replies
5
Views
697
You need a new service engineer not a new...
Replies
3
Views
977
Be aware that you’ll likely require a gas pipe...
Replies
3
Views
2K
M
Hello, We’ve recently moved into a fairly old...
Replies
0
Views
631
MartinPod81
M
Back
Top