boiler service | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss boiler service in the Boilers area at Plumbers Forums

Status
Not open for further replies.
N

nysk2008

going to service an ideal minimiser ff50 tomorrow - anything on these I should be double checking for? Never looked at one of these but had a flick through the mi's and they seem ok on paper

appreciate any advise

cheers
 
ooooooooooooohhhhhhhhhhhhhh great - i'll make sure I take a hammer, axe, chainsaw and bull dozer and will walk in with a shiney brochure of new boilers under my arm.
 
Not much to them really.
Make sure FGA readings are good and inspect flue as much as possible. The baffles in heat exchanger go and burn through the flue.
 
Status
Not open for further replies.

Similar plumbing topics

We've just sorted one of these situations...
Replies
9
Views
1K
Sensocomfort with outside temp sensor. RF or...
Replies
7
Views
753
Something as simple as turning the power off...
Replies
12
Views
2K
Is your boiler the 'Ideal Logic Heat 12' (i.e...
Replies
1
Views
848
Hi appreciate and thanks to all that replied...
Replies
11
Views
1K
Back
Top