Boiler sizing (UnderFloor Heating) | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Boiler sizing (UnderFloor Heating)

Post thread

Discuss Boiler sizing (UnderFloor Heating) in the Boilers area at Plumbers Forums

Status
Not open for further replies.
watts per m2 required for the room (dependant on the specified pipe spacing) 200mm spacing in screed floors is generaly 100watts per m2 ,which manufacturer of ufh are you using?, all companys will offer a free design service on a drawing which even shows you where to run each pipe so you dont get any joins, over long runs in a zone etc.
 
Last edited by a moderator:
Status
Not open for further replies.

Similar plumbing topics

mehmet
Combi underfloor heating and external boiler connection?
Why/what are you trying to achieve? If you...
Replies
3
Views
732
Timmy D
T
av2597
Wet Underfloor Heating Using Woodburner Boiler
I started a long winded response but deleted...
Replies
1
Views
743
SimonG
SimonG
P
Changing from system to combi boiler with under floor pipework.
System boilers have a pressurised heating...
Replies
1
Views
283
gmartine
gmartine
B
New boiler - Inhibitor top up?
What type of boiler is it?
Replies
2
Views
498
Lou
Lou
M
Baxi boiler pressure drops after heating
Isolate and drain boiler. Pump up expansion...
Replies
1
Views
741
oz-plumber
O
Back
Top