boiler with wall plate

[heatybob]

Can anyone recommend a decent combi boiler c/w wall plate to allow me to route the pipework up the back of the boiler,now heres the tricky bit, price wise up to £700.many thanks in advance.

 

[quality]

you can buy a wall plate for any boiler that has one for a couple of hundred quid at the most but then you have to buy the boiler to suit obviously

 

[tamz]

Worcesters are about the only ones you can get the pipes up the back without using a stand off kit. Kits are available for most boilers for around 40 quid. They add around 40mm to the depth of the boiler.

 

[barronbathrooms]

You can run pipe work behind a main eco combi. Fitted several lately seem good value for money at 600 with clock flue etc. Can extend warranty to 7 years for extra 180 then again for 800 can get a worcester with 7 years warranty

 

[buckley plumb]

you can buy a wall plate for any boiler that has one for a couple of hundred quid at the most but then you have to buy the boiler to suit obviously

you cant get a rear piping jig for a glowworm betacom a . the boiler comes with a 2 sided papertemplate one for boiler holes the other for jig but glowworm dont do the jig tried and told there is no intention to do one

ant

 

[cascas]

you can buy a wall plate for any boiler that has one for a couple of hundred quid at the most but then you have to buy the boiler to suit obviously

Ideal independent with stand off kit should come within budget.