Bottle Auto Air Value | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Bottle Auto Air Value in the Air Sourced Heat Pumps area at Plumbers Forums

Messages
9
I need 3 auto air value for my CH system. Any suggestions to a good quality 15mm product. I was going to buy the unbranded screwfix ones but some of the reviews are terrible.

Thanks folks.
 
there not designed to be left open you know so you will have to close / tighten the bleed screw?

have a look at a sprio rv 2
 
As above really. Most cheap AAV's will leak eventually and become a nuisance or do damage. There is a Commercial one I do rate quite highly but it will cost a pretty penny and probably be overkill on domestic. I would go for the manual as other suggest. Once vented a system should not suffer with air issues, as long as it has been installed correctly.
 

Similar plumbing topics

  • Question
If your cylinder is heated by solar thermal...
Replies
3
Views
914
  • Question
Understood, will order the part, is it...
Replies
7
Views
822
  • Question
Hi Ric - thanks you so much for taking time to...
Replies
4
Views
1K
  • Question
It could well be, the OP will soon hopefully...
2
Replies
35
Views
3K
Everything working fine on PP mode - thanks...
Replies
7
Views
1K
Back
Top