bottle gas (butane) cooker

[tadleymansions]

Hi
I have a bottle gas cooker withe 2 burner hob. Burners on hob have flame fail sensors. One burner will burn quite happily until a pan or kettle (or something) is put on. After short period the burner goes out.
The other ring works OK.

Any ideas would be most welcome - I have no hair left to tear out.

John

 

[Kip]

Get it serviced, sounds like could be some crap under the plates..

 

[migoplumber]

incorrect governor pressure, placing an item on the happily burning ring, impinges the flame, and removes flame from sensing device.

 

[tadleymansions]

Thanks to both.
I'll go through it again and give a really good clean.
Do flame fail devices either work or not work i.e there is no "in between"?

John