Boulter Camray oil boiler cuts out but starts if front cover removed - Any ideas? | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Boulter Camray oil boiler cuts out but starts if front cover removed - Any ideas? in the Boilers area at Plumbers Forums

Status
Not open for further replies.
L

lodgey47

As title when my Camray starts up it runs for a few seconds then stops. A few more seconds later it starts again then stops again...... and so on. What I've found is if I partly remove the front air tight cover it runs fine with no problems. It was serviced over the summer but can't get the engineer back now until after christmas. The fan is quite, oil pump seems ok, flue isn't blocked, plenty of oil. Any ideas?? Cheers
 
It sounds like burner is being starved of oxygen, it either needs the air increasing on the adjuster, best done with a flue gas analyzer. Or its recycling its own flue gases because the flue seals have gone
 
Could also be the combustion chamber access door joint leaking, has it been off recently.
 
Status
Not open for further replies.

Similar plumbing topics

L
Camray 5 (90A) (20 year old) oil boiler, had a...
Replies
0
Views
1K
Lincoln22
L
All sorted now and running better than ever...
Replies
3
Views
1K
S
OK then, good luck with it 👍👍
Replies
3
Views
1K
Update: I couldn't get hold of a heating...
Replies
5
Views
2K
Back
Top