Brilliant filling loop valves | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Brilliant filling loop valves in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Never had them pass before. Are you sure it is the valves and not just the levers not switching them off properly?
 
I have had the same problem, customer topping up after work from decoration, junk gets behind the valve when topping up and hay presto. You could get away with one but likely you will need both.
 
Definitely passing as when I disconnect the hose I got water coming from cold side and return side. Expensive they are
 
the knobs round off on these and only need need allen key to isolate iso valves
 
Status
Not open for further replies.

Similar plumbing topics

1/2 tap flexi both ends eg loose nut both ends...
Replies
3
Views
239
Flexible couplings everywhere? Perhaps thats...
Replies
9
Views
503
Not a viva just a cheap one will need to re...
Replies
1
Views
288
You might have a EV (expansion vessel)...
Replies
7
Views
482
I've used a decent double check valve, two...
Replies
2
Views
340
Back
Top