Bristan Taps Rigid Tails Instead of Flexi

[techweb]

Hi,

As I need to purchase two new taps for our en suite, I've noticed that almost all taps now come with flexi tails as standard. I've read some horror stories about these bursting / leaking so would prefer rigid fixings like the existing ones they are replacing.

I'm looking to purchase this tap: Blitz Basin Mixer Chrome | Bathroom Taps | Bristan - https://www.bristan.com/products/bathroom-taps?code=btz%20bas%20c

Am I correct in assuming, I can just buy these copper tails as a solution: Bristan M12 x 265mm Copper Tails Pair | Genuine Bristan Spare - https://www.showerstoyou.co.uk/bristan-m12-x-265mm-copper-tails-pair/?gad_source=1&gclid=CjwKCAiA_tuuBhAUEiwAvxkgThtYa4pGgrmMB8j5Zki7A0EGZ3TDL5AQzr7N-ym6sYCRX9exhwDvIhoCC9EQAvD_BwE

Thanks in advance...

 

[Ben-gee]

I would contact Bristan and check size if I were you. Flexies can commonly be 8, 10 or 12.

 

[techweb]

I would contact Bristan and check size if I were you. Flexies can commonly be 8, 10 or 12.

Looking at the document, they are actually 10mm. I've reached out to them to confirm required parts.