British gas stat | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss British gas stat in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
L

learnplum

Hi does anyone know the make of a common wireless stat by british gas?
Its says british gas on the stat and receiver.
Its an oldish wireless stat and programmer.
I know it if I see it, but can,t find it on the net.
It has 4 batteries.
Lost the bloomin make in the van.
Need to reset it tommorow, on a void property.
Thanks:tounge_smile:
 
:blush5:I no ch4, sorry I sometimes kick my own dumb bum.:blush5:
 
They use Drayton stuff. I know the stat you mean, two draws left and right side. If you are just changing the batteries and its not dead you'll be fine. If it's dead. Hold both buttons on the reciever for a few seconds until they flash slowly. then push in the left draw followed by the right, and increase the temp. That should do it.
 
Is this what you mean??
 

Attachments

  • image.jpg
    image.jpg
    10.3 KB · Views: 40
I thankyou both, I can,t thank you both enough.
That is the one.
Any tips on setting it up?
What is the part or reference no.? thanks?
I will read it:blush5:
 
Status
Not open for further replies.

Similar plumbing topics

Until the frost stat is satisfied then the...
Replies
7
Views
5K
    • Agree
  • Question
https://heatpumps.co.uk/types-of-heat-pump/deli...
Replies
17
Views
2K
  • Question
I wanted to bring this one to conclusion. My...
2
Replies
36
Views
3K
? 'Heat Only' No No heat currently Not sure...
Replies
7
Views
2K
Back
Top