Britony combi se 40 80 flashing | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Britony combi se 40 80 flashing in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,650
Hi

Ok went out to have a look at a mates boiler a couple weeks ago, he said he wants a new boiler. Ex vessel has gone but also numerous leaks and never been serviced. Managed to get it running, said to him give me a weeks notice and I'll replace it.


Did I hear back? Course not.

Text tonight, boilers packed up 80 and 40 lights are flashing. He had a leak under the floor before so was constantly having to top the pressure up. I fixed the leak but with the ex vessel knackered pressure gauge is a bit erratic anyway.

Currently showing 3bar.

Anyone familiar with these boilers? He said it won't reset. I'm not going out tonight but don't mind send a text or 2 to help it get going if it means not interfering with the appliance. No ch or hw.

I'm thinking pump fan or aps but perhaps this is a common fault.

I have had regular calls over last few weeks saying still wants new boiler, I have all the time replied just hive me a weeks notice.
 
Status
Not open for further replies.

Similar plumbing topics

That’s there problem you pay them to fix it...
Replies
2
Views
851
There is 6 pipes under the boiler and one goes...
Replies
19
Views
1K
Yep change both at the same time
Replies
11
Views
1K
I have a baxi neta tec combi ga24, if it was a...
Replies
3
Views
1K
Good job buddy. Rather than a beer, if you’re...
Replies
24
Views
3K
Back
Top