broag remeha avanta | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter REDSAW
  • Start date
  • Replies 2
  • Views 1K

Discuss broag remeha avanta in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
R

REDSAW

went to customer today, water in system but gauge showing zero.
apart from the obvious knacked gauge, what else may be causing malfunction and how reliable are these gauges.?.
ps allready tried a pin down the pipe, although there is a lot of corrosion in the system i am wondering if the gauge pipe could be solid.
due back in morning to sort it.
 
went to customer today, water in system but gauge showing zero.
apart from the obvious knacked gauge, what else may be causing malfunction and how reliable are these gauges.?.
ps allready tried a pin down the pipe, although there is a lot of corrosion in the system i am wondering if the gauge pipe could be solid.
due back in morning to sort it.

Seems like installed by one of those,no system flush,non notifing,save £100 guys:D

PIcked a good boiler though !!Me fav boiler,had no problems with gauge
 
Seems like installed by one of those,no system flush,non notifing,save £100 guys:D

PIcked a good boiler though !!Me fav boiler,had no problems with gauge
yoou wont believe this pudd,
but yeh,the same person i was refering to in previous:D
 
Status
Not open for further replies.

Similar plumbing topics

W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
772
P
    • Like
    • Useful
    • Creative
  • Locked
"You mean baxi/remeha?" That's the one. They...
Replies
3
Views
29K
polymnio
P
Yeah I think there was loose wiring in the...
Replies
6
Views
929
B
Context for issue: I'd like to start by...
Replies
0
Views
610
Butchy10
B
I decided not to change the radiators and have...
Replies
6
Views
3K
Back
Top