broken air vent in rad | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss broken air vent in rad in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
B

beano

Hi all. Just new to this site
Was wondering is there any way of fixing a broken air vent in a radiator . can you buy a kit or anything? The vent is quite small at the back of the radiator. thanks
 
New radiator.

By the time you take the radiator out, drill it out, manage to get the last of the bleed vent and try to clean the threads up only to realise the spare gets stuck or doesnt fit.

youve wasted a load of time and money.
better to get a nice sniney new one and fit it
 
Best option is dont bother - unless your really unlucky the air in this rad will get pumped around to another radiator which you can vent Centralheatking :96:
 
Last edited by a moderator:
Use to drill and re-tap rad vents on myson rads to save money when I use to work for BGas ... ones on the side. However I totally agree with above... Not worth the effort unless you're skint!! :)
 
Funnily enough, I've got one of these booked in for Wednesday.

Rad off, lay it flat, sharp tap with centre punch, 3mm hole and an easy-out. Job's a good 'un...
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Thanks very much for all the advice John, it's...
Replies
13
Views
997
  • Question
Understood, will order the part, is it...
Replies
7
Views
822
  • Question
I can't see why it would be a problem, it's a...
Replies
3
Views
868
  • Question
So, we have our answer. I tried a snake/rod...
Replies
5
Views
619
S
  • Question
When you flush the toilet, do you hear any...
Replies
1
Views
435
Back
Top