build in gas oven Belling B170G

[SafeGasInstall]

when to see a job to day .customer want to take out a elect oven and gen one of this
Belling B170G.I have never fit a build in gas oven ,so any advice welcome PLEASE.
I will be fitting a gas hob to! have done lots of gas hobs but gas oven never!have gone through Mi and they dont specified anything apart from dimensions and input !
what should I watch out in order to do the job ?
it can not be rigid connected is't?????

t

 

[wards]

you should not encounter any problems as long as you follow the mi.s,built in gas ovens are connected via a flexible cooker hose,just make sure that when fitted into the unit that the hose does not kink or come into contact with the fan or restricted heat zones,hope this helps.

 

[SafeGasInstall]

Thank you have been waiting some one to replay so to be sure that is flex connection!have never ever come across one , customer is actually waiting on a replay from me that I can do the job so he to buy the oven!

 

[Puddle]

As below,just make sure hose positioned correctly and also check ventilation requirements into unit are met but should be no problem

 

[aggis]

Follow the MI's & it'll be straight forward as the others have said, remember to screw the oven to unit.
I see too many oven units not secured when doing landlords.
Such an easy job to do, open the oven door & use 4 screws n the predrilled holes

 

[Billy Bob Bob]

read the mi,s regarding ventilation as well,nowadays its not uncommon to find they want permanent extraction and ventilation