I had new taps fitted within the last year on my bathroom sink. When turning on both the hot or cold tap, there is a vibration/squeaking noise, if the turn the tap fully on the noise stops. I have replaced the flexible hoses to both taps and fitted in-line isolation valves. The noise is now better but the isolation valves are barely open i.e the flow is slow. If I increase the flow the noise returns. Any advice would be appreciated. Thanks, Roy
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Discuss Burlington bathroom tap noise in the UK Plumbers Forums area at Plumbers Forums
Similar plumbing topics
- Question
Having thought about it i'm sure there is a...
- Cazza
- UK Plumbers Forums
- 6
- 992
- Latest:
- Cazza
- Question
Thank you, have corrected this now. My husband...
- ocxomel
- UK Plumbers Forums
- 10
- 1K
- Latest:
- ocxomel
- Question
I’ve got exactly same problem. I have to put...
- Question
Depends on the length of the flexi on the new...
- Drainbrain
- UK Plumbers Forums
- 1
- 887
- Latest:
- ShaunCorbs
