Can anyone help to find a supplier of this trap?

[quality]

Can anyone identify this trap or a replacement? TIA

 

[SimonG]

That looks like a bath trap that somebody has connected the left hand waste into the clean out.
[automerge]1591450194[/automerge]
This one.

https://www.NoLinkingToThis/p/mcalpine-bath-trap-white-40mm/40633

 

[turnpin]

Agree with Simon G it's a made up job using a MacAlpine bath trap with a mixture of bits and pieces....can't see from the picture if the waste pipe can be lowered in the corner after its left the trap if it can you may have an option to alter it......regards Turnpin

 

[snowhead]

Polypipe Nuflo bath trap, (deep seal) as above cobbled together with a compression elbow and short extension

40mm Low Level Bath Trap 76mm Seal | Howarth Timber

www.howarth-timber.co.uk

40mm 90 Degrees Swivel Elbow | Howarth Timber

The 40mm Swivel Elbow is made from a tough plastic and forms part of your waste system. Its role is to change the overall direction of the pipework, perhaps to navigate it through a tight area or to keep the plumbing tid

www.howarth-timber.co.uk

Something like this with the thread cut off

https://www.NoLinkingToThis/p/mcalp...V0e3tCh1T1ga5EAQYByABEgLlxPD_BwE&gclsrc=aw.ds

 

[quality]

Thank men👍looks like an easy lash up