CAN I REPLACE THE PRESSURE ADJUST CONTROLLER

[Photodom2001]

Hi there.

First Post. I am having a problem with the pump pressure adjust electrical black box attached to the side of my Wilo Gold 50 pump. In the last few month's it has been necessary for me to use a screwdriver to move the white speed controller on top of this box in order to get the pump running. When I do this everything is fine - for a while. However, I realise that there is a problem with the controller and want to know if I can simply replace this as opposed to having to replace the entire pump.

Thanks

 

[ShaunCorbs]

Nope sorry don’t sell them separately need to change the pump

 

[Photodom2001]

Nope sorry don’t sell them separately need to change the pump

Thanks. Seems a complete waste when the pump is working fine. It seems to be just a dodgy electrical connection as when I twist the speed selector switch past 3 with a screwdriver the pump runs. I wonder if I can open them up and have a look (power off of course.)

 

[ShaunCorbs]

Maybe look at soldering an aftermarket 3 position switch ?