Hi all, first post following a google of "using power flush to fill solar" and I ended up on this forum...hello.
I had a flat panel solar system installed about 4 years ago, but following some recent building works, needed to drain the system down.
All glycol saved and ready to refill, but with the mad rush for PV install by end of 12th Dec 2011, I am getting no where with a solar compnay to refill the system.
My neighbour is a gas/plumbing engineer and has the power flushing kit. But as I read this is Ok for filling the system / getting air out, but can not pressure sire the system to the approx 2.5 bar. For this I use the pressure pump /tank system?
Does this sound OK for a one off fill?
Thanks