Can’t seem to get rid of air in my system | Air Sourced Heat Pumps | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Can’t seem to get rid of air in my system in the Air Sourced Heat Pumps area at Plumbers Forums

Messages
1
Hello,

Recently I noticed that my 2 living room rads were not heating up. All other rads in the house were. It was suggested to me by a plumber to turn the valves on all the working rads off only leaving the two living room rads on and they should heat up. Wait 20-30mins and then turn all rads back on. He said it would likely be air in the system.

Sure enough my living rads started pushing out full heat and I could hear water gurgling in one of the rads as it began heating. I followed the plumbers instructions and everything seems fine but I’m still not happy with my living room rads, one is still not getting as hot as it use to and they are still intermittently heating/not heating when they should be.

For some context, I live in a bungalow, I have a Worcester bosch green star 30i combi supplying 8 rads. The two living room rads are the two furthest from the boiler and one of them is only 6 months old. I’ve tried bleeding all rads numerous times and whilst I am occasionally getting air from a few it still hasn’t sorted the issue. When the issue first occurred I even drained the whole system and refilled with no joy.

The only thing that has changed recently is a bathroom refurb. Separate bathroom/toilet each with its own rads has been knocked through and one rad put in its place. Which became the closest rad to the boiler.

Apologies for the long winded post, I’m at a bit of a loss here, I’m not sure if it’s worth calling a plumber out for this? Any ideas would be greatly appreciated.
 
Might be an issue with the pipework from refurb but i expect the bathroom rad if non TRV & lockshield controlled has the lockshield open a lot.

Easy way to try is to count number of turns to turn it off & then open it say 0.5 - 1 turn to see if it helps with pushing the heat to the furthest away rads.

Possibly not a well balanced system but there is threads on here if you search them out, take your time doing it over a few hrs/days & see how system settles down.

Hope this helps,

Thanks,

Andy
 
Last edited:
Have you actually bled the air from the system? Turning all but the offending radiators off, then back on again, won't clear the air, each radiator and possibly the pump needs to be bled of air individually. Turn on all the radiators. Run the system for 10 minutes, then turn it off. Wait for the system to cool (say 1/2 hour), then bleed each radiator in turn. Do ones nearest boiler (downstairs?) first, then furthest from boiler.
 

Similar plumbing topics

  • Question
I can't afford it at the moment, but I had one...
Replies
2
Views
457
  • Question
Red circles show my new AAVs and the manual...
Replies
17
Views
2K
  • Question
It could well be, the OP will soon hopefully...
2
Replies
35
Views
2K
S
  • Question
Hi guys, we moved into a place last Dec with...
Replies
0
Views
960
Sam Grocock
S
  • Question
Roughly 2.5kw for a insulated cavity and one...
Replies
5
Views
297
Back
Top