cast iron stack

[pauls]

whats the best way to take out a cast iron stack.........start at the top and angle grind sections out

 

[kingkenny]

if its old timesaver,top to bottom.

 

[stevetheplumber]

before you start youve got to stop any debris going down the drain if there acces at base no problem if not i cut with large angle grinder and slide in a sheet of ally or ply some times you can get a drain bag in from the wc branch then work from the top
i tie the ladder to the wall with an eye bolt then tie each piece to the ladder before breaking with a club hammer use a chisel and or nail bar to get nails out
warning cast iron is heavy and bits fly of if not broken gently mind the windows

 

[WHPES]

Make sure youve got goggles on!

 

[pauls]

cheers fellas .........aint doing it now till the weather gets better now