Central heating for tiny house? | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Central heating for tiny house? in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
Messages
1
Well, I live in a VERY small 1 bed house with heating sources of wood burner in the kitchen and two electric radiators, 1 in the bedroom and 1 in the bathroom.

I have asked a local heating engineer to give me an idea of installing a back boiler onto the wood burner and then 2/3 radiators into the other rooms.

I was advised NOT to have a 'wet'(?) heating system as it would be impossible to dissipate unwanted heat from the system. The proposed solution was a blown air system which, to me, is not a solution I would even consider.

So, my questions is this...

My house is tiny and, for the most part, heats to a reasonable temperature from the wood burner in the kitchen. At times when the temperature falls below 10 degrees I would like to be able to heat radiators from the wood burner some way.

In my book, comfort wise at least, there can never be too much heat! Yes, I feel the cold! I'm happy to open a window or two! However, if it is a safety issue then I completely understand.

Would really appreciate some guidance/ideas on how best to achieve a warm house from a wood burner without blowing the place up!

Any tips or advice would be greatly appreciated!
 
Easy. Correctly sized, input to hot water and heat leak rad. Safety first. Find a HETAS engineer.

But it won't be cheap.
 
OFTEC is also offering a solid-fuel competency scheme. HETAS is not the only scheme of its kind, and there may be others too.
 
Status
Not open for further replies.

Similar plumbing topics

In the end decided to follow Chuck’s advice...
Replies
11
Views
663
Can central heating / gas engineer expert help...
Replies
0
Views
823
Thermal store fits the bill but don’t forget...
Replies
1
Views
303
I have a home with an oil boiler in a garage...
Replies
0
Views
634
it is brand new ( 6 months old ) Worcester gas...
Replies
2
Views
682
losing pressure
L
Back
Top