Central heating manifold under floor boards | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Central heating manifold under floor boards in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
C

Clark Harris

Hi can anyone tell me were manifold or spider the plumber calls it would be under the floor boards.doing downstairs from hall into living room .hall has main radiator with no thermostat on it total novice any advice appreciated.
 
most likely it will be under the floor, fed by 22 or 28 mm. hall rad will not have a thermostat because the wall stat is there most likely.
 
most likely it will be under the floor, fed by 22 or 28 mm. hall rad will not have a thermostat because the wall stat is there most likely.[/QUOTE cheers Steve .have u any idea were it be under the floor or is it just a case of torch and going under.lol
 
yes you will have to go exploring there isn't a standard place to put them. it would be great if there was it would make our job easier.
 
normally near A/C to reduce the amount of larger sized copper installed. (not best practice but very common)
 
Status
Not open for further replies.

Similar plumbing topics

Hi Basher, Thank you for the reply. So the...
Replies
8
Views
794
I have a home with an oil boiler in a garage...
Replies
0
Views
634
https://www.plumbersforums.net/threads/problems...
Replies
6
Views
1K
Each manifold will have it's own pump and TMV...
Replies
7
Views
961
Back
Top