Central heating pump stopped working | Central Heating Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Central heating pump stopped working in the Central Heating Forum area at Plumbers Forums

Status
Not open for further replies.
W

WDeranged

Hi, I've got a reasonably old gas heating system, it's a back boiler behind my gas fire and last month the central heating stopped working but the boiler is still heating water.

Anyway the pump is very much like this one

http://www.tradingdepot.co.uk/external/commerce/1/gfx/hires/GFPUPS1560.jpg

And its connected to a timer exactly like this one

http://www-4.plumbworld.co.uk/danfoss-gp-102-24hr-766-1370m.jpg

I had a look a few weeks ago but it's in a cupboard that isn't easy to access so sorry if I don't have all the info ready, I basically have to move all my computer equipment to open the door :rolleyes:

With my ear against the pump I couldn't hear a single hum, click or whirr when flicking the power switch yet the boiler kicks in fine, could the timer be faulty or has the pump just outright died?

My experience with other pumps has lead me to believe they don't just drop dead like that, they at least make *some* noise.

Sorry for the lack of info, I'll have to fill in the blanks as I go along.

Thanks
 
I would first check to see if power is getting to the pump ( use a multimeter) if it is try removing the large screw in the centre of the pump motor and with a small bladed screwdriver rotate the pump motor, if it rotates freely and you have power to it then you most likely need a new pump. I suspect your system operates on gravity for hot water and that is why you still have hot water. hope this helps, Martin
 
Status
Not open for further replies.

Similar plumbing topics

B
Context for issue: I'd like to start by...
Replies
0
Views
561
Butchy10
B
S
Thanks everyone for the advice so far. I got...
Replies
6
Views
1K
Sam Wain
S
L
Replies
2
Views
2K
This was indeed the case, picked up a new zone...
Replies
13
Views
2K
I think the old pump is a 5M, the old old pump...
Replies
10
Views
2K
Back
Top