Hi All,
1st post on here and hoping someone can help out.
Im in the early stages of a garage conversion; I've temporarily hung the vertical radiator where its planned to go and my plumber has routed a couple of feed and return pipes in ceiling; i've attached a couple of photos showing the location.
My issue is the routing of the pipework to the radiator as the joist is hard against the wall. Structurally its not correct to notch out under the joist so want to see if anyone had any suggestions whilst I still have a blank canvas?
I did find a previous post but was unable to see the photos to determine if it was the same scenario? Suggestions for radiator pipework route around joist - https://www.plumbersforums.net/threads/suggestions-for-radiator-pipework-route-around-joist.100198/
Thanks
1st post on here and hoping someone can help out.
Im in the early stages of a garage conversion; I've temporarily hung the vertical radiator where its planned to go and my plumber has routed a couple of feed and return pipes in ceiling; i've attached a couple of photos showing the location.
My issue is the routing of the pipework to the radiator as the joist is hard against the wall. Structurally its not correct to notch out under the joist so want to see if anyone had any suggestions whilst I still have a blank canvas?
I did find a previous post but was unable to see the photos to determine if it was the same scenario? Suggestions for radiator pipework route around joist - https://www.plumbersforums.net/threads/suggestions-for-radiator-pipework-route-around-joist.100198/
Thanks
