Changing sink bib taps

[WaterTight]

Need to change these...


Not tackled any of these before.

What am I looking at here, is this a standard copper to iron (15mm compression one side, female 3/4" the other side) fitting with a 3/4" male ended bib tap screw in? So identical to an outside tap?

Or do the bib taps have ends already on them that join onto a standard compression fitting with an olive?

I'm thinking it's got to be the first one but there's not even a billionth of a millimeter of a 3/4" thread visible on the end of the bib tap which is why I was wondering if the second 'version' might be what I'm looking at?

Thanks

 

[ShaunCorbs]

Looks like there’s 15mm sticking out and they’ve used a 15-1/2” female iron then onto the 1/2 bib tap

 

[WaterTight]

You were right, Shaun. Many thanks.

Fitted his replacement £6 taps off eBay. Good old China.

 

[Ric2013]

I wonder what they might sell for if polished up and fully overhauled?

 

[oz-plumber]

I wonder what they might sell for if polished up and fully overhauled?

Scrap value.
As is - no polishing or overhaul required - won't increase the price

 

[Ric2013]

Scrap value.
As is - no polishing or overhaul required - won't increase the price

Take the jumper out and sell it in a grot shop. You'd get a fortune for it