Hi everyone,
Well...with my luck, my circulating pump has crapped out leaving us freezing!
Id really appreciate some help choosing a replacement.
I have a 2 bed flat with electric Trianco boiler and closed Y plan system.
Ive bled the system and while spinning the shaft/bleed screw the motor doesn't even try to move - it just hums.
The existing pump warranty expired 08. The pump is labelled Ikon, it seems to be an old Myson pump with a bleed knob rather than screw.
My confusion comes from the label, there is no direction arrow and the speed settings seem to be much higher than any replacements. It was set on the highest speed aswell.
Existing settings: 0.45A -> 104W -> 1850 n(min-1)
The replacements seem to be energy friendly types which don't show flow rate, only power, which seems to be max 44W. Am I missing something?
To be honest Id prefer the cheapest one which will get the job done as funds are tight.
Again, really appreciate any advice/info you can share, have a nice warm Sunday!
Well...with my luck, my circulating pump has crapped out leaving us freezing!
Id really appreciate some help choosing a replacement.
I have a 2 bed flat with electric Trianco boiler and closed Y plan system.
Ive bled the system and while spinning the shaft/bleed screw the motor doesn't even try to move - it just hums.
The existing pump warranty expired 08. The pump is labelled Ikon, it seems to be an old Myson pump with a bleed knob rather than screw.
My confusion comes from the label, there is no direction arrow and the speed settings seem to be much higher than any replacements. It was set on the highest speed aswell.
Existing settings: 0.45A -> 104W -> 1850 n(min-1)
The replacements seem to be energy friendly types which don't show flow rate, only power, which seems to be max 44W. Am I missing something?
To be honest Id prefer the cheapest one which will get the job done as funds are tight.
Again, really appreciate any advice/info you can share, have a nice warm Sunday!