Hi all,
First Post on here. I am hoping someone can help with the below.
I have mounted 2 new rads to a recent extention we have had. The rads are not connected up to the heating system which is a combi fed system.
I thought it would be good practice to clean, flush, refill and use an inhibitor when filling up with the new rads connected.
I purchased a flomasta clean and inhibitor kit from screwfix and put the cleaning solution in 2 days ago.
I plan to flush the cleaner out on monday/Tuesday but I am unsure how to flush it out. Is it a case of numerous drains and refills? Is there a way to isolate the boiler and use the filling nozzle built into the boiler to flush the rads (I have a drain valve on the lowest rad downstairs)
Any help would be great. Thanks
First Post on here. I am hoping someone can help with the below.
I have mounted 2 new rads to a recent extention we have had. The rads are not connected up to the heating system which is a combi fed system.
I thought it would be good practice to clean, flush, refill and use an inhibitor when filling up with the new rads connected.
I purchased a flomasta clean and inhibitor kit from screwfix and put the cleaning solution in 2 days ago.
I plan to flush the cleaner out on monday/Tuesday but I am unsure how to flush it out. Is it a case of numerous drains and refills? Is there a way to isolate the boiler and use the filling nozzle built into the boiler to flush the rads (I have a drain valve on the lowest rad downstairs)
Any help would be great. Thanks