Cold Radiator | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Cold Radiator in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
C

Centurion1

Hi all,

I have recently refilled my hot water & central heating system after fitting a new 2 port valve. All of the radiators are hot with the exception of the one in the kitchen downstairs, I have bled them all so am clueless as to why this one rad remains cold? Any ideas??

Regards
 
try shutting down all the other radiators, and see what happens. hopefully you will have an airlock, and the above procedure will cure the problem.

good luck
shaun
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Will be a 15-60 then prob ups2 Green lights ?
Replies
8
Views
1K
  • Question
Well done for sorting it. Waggling the trv pin...
Replies
7
Views
1K
You seem to have got it sorted, but for future...
Replies
7
Views
1K
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
938
Have you got a photo of the sink at the...
Replies
2
Views
631
Back
Top